fbpx

COMMENT ÇA MARCHE

Do you have questions about how PRESSURISEURS DE TÊTE works? Learn here how pressurizers work to multiply the life of your tennis and padel balls

EXPLANATION ABOUT DIFFUSION PROCESS

VIDÉOS

HEAD X3 COLOR

Operation

HEAD X3 / X4 POMPE

Operation

What if I add too much pressure?

HEAD X100

Operation

POMPE À AIR

Operation

It is important to know that the quality of tennis and padel balls influences your condition and recovery. Can old balls be recovered? Yes, but it is a slow and tedious procedure. We recommend you start using our products with new balls. Thus, they will always remain in perfect condition.

We also recommend you pressurize the balls right after each game or practice. Inactivity, together with the cold, are the main causes of pressure loss in the balls. How many hours do you have to pressurize the balls? There is no set time. It will be enough that you leave them pressurizing between games.

How long will the balls last using HEAD PRESSURIZERS? It depends on the quality of the balls and the use that is given to them. It must be taken into account that the rubber acts like a spring and weakens with impacts. Also the balls lose their hair over time. For this reason, even if the pressure remains intact, there will come a time when you have to change the balls again. Even so, we can assure you that your balls will last up to four times longer!

POMPE HEAD X3 / POMPE TÊTE X4

Initial Recommendation: If you want to completely fill a new ball with air, without having previously used it, open the ball canister 48 hours before playing and pressurize the balls to 29 PSI. Being new, they support greater thrust pressure almost without deforming.

How much pressure to apply?: Our recommendation is to apply 29 PSI pressure to your balls after each use to achieve maximum pressure.

How long to pressurize?: Do not worry about the time that passes between each pressurization. The important thing is that from the time you finish playing until the next use, no matter how much time passes, the balls must be pressurized.

You should keep in mind: Inactivity and cold are the main causes of air loss (pressure) from the balls.

HEAD X3 PUMP DATA SHEET // HEAD X4 PUMP DATA SHEET

TÊTE X100 PANIER

Initial recommendation: To find out what the ideal pressure is for your HEAD X100 BASKET, introduce air with a pump or a compressor until the safety valve pops, regulated between 21 and 27 PSI. Memorize how many PSI it has jumped to so you know what pressure to give the next times you use the product.

Remember that when the safety valve pops, the air will be eliminated, reducing the pressure to 13 PSI. For this reason, you must re-introduce air up to the limit set by the safety valve.

How much pressure to apply?: Our recommendation is to apply 21 PSI pressure to your balls after each use to achieve maximum pressure and prevent the rubber from suffering. Thus, it will offer a better bounce for much longer.

How long to pressurize?: Do not worry about the time that passes between each pressurization. The important thing is that from the time you finish playing until the next use, no matter how much time passes, the balls must be pressurized.

You should keep in mind: Inactivity and cold are the main causes of air loss (pressure) from the balls.

The best of HEAD X100 BASKET: HEAD X100 BASKET does not allow more pressure than the safety valve marks, so the rubber will maintain a cleaner and more homogeneous rebound for much longer.

HEAD X100 BASKET DATA SHEET

Funcionamiento HEAD PRESSURIZERS

RECOMMENDED PRESSURES:

  • SLOW BALL -> 11 PSI.
  • MEDIUM BALL -> 15PSI.
  • MEDIUM-FAST BALL -> 24 PSI 
  • FAST BALL -> 29 PSI 

HEAD X3 PUMP and HEAD X4 PUMP recommendations:

    • We recommend that you pressurize the balls at 29 PSI.
    • All new balls have a pressure between 11.5 and 13.5 PSI.
    • Any pressure above 14 PSI allows the balls to recover pressure.
    • The balls recover their pressure little by little through the pore of the rubber, just as it happens with the loss of pressure. The more air they need, the longer it will take them to recover.
    • Be careful! If you apply too much pressure, it is possible for the ball to flatten and break.
    • New balls are sold with different pressures inside the tubes. PRESSURISEURS DE TÊTE equalize the pressure of all balls.
    • Balls that regain their pressure can grow in size.
    • The bounce of the balls is thanks to the rubber, which has a spring effect. Little by little this material weakens and loses quality, so over time the pressure will be maintained but the rebound will worsen.

    HEAD X100 BASKET recommendations:

    HEAD X100 BASKET is recommended for tennis and padel professionals, such as schools, clubs and instructors. It is a high-capacity pressurizer that allows you to recover the pressure of 103 balls at a time, and allows you to complete the course with just two boxes of balls.

    The strong point of HEAD X100 BASKET  is that since it cannot be given more pressure than the one regulated by the safety valve, between 21 and 27 PSI, the rubber stays in better condition for longer, offering a cleaner and more homogeneous rebound during months. Do training balls lose the same pressure as match balls? No. First of all, because they spread the impacts among more balls. And, secondly, because the training balls are in motion from Monday to Friday, or on weekends.

    The air molecules are active by spending more hours in motion, so the air stays inside the ball for longer. It must be remembered that inactivity is the main cause of air removal from the ball. It is very important that they recover their pressure but that it does not spoil and the rubber suffer.

    Several studies show that the quality of the rebound and compression of pressurized balls improved exponentially with respect to those that are not.

    mejora pelotas tenis padel con presurizador
    mejora pelotas tenis padel con presurizador

    DO YOU WANT MORE INFORMATION?

    • The cold or heat, the altitude, the level of play, the sport that is practiced (tennis or paddle), the assiduity, the level of play, the number of impacts, the quality of the rubber or the surface on which the sport is practiced can vary the pressure needs that must be given to the pressurizers.
    • Be careful! The pressurizers that have a pressure injection system by means of a pump can be put much more pressure than recommended, but that harms the balls.
    • Les problem with pressurizing balls to high levels is that they can get egg-shaped and then have a bad bounce.