fbpx
(0) Total: 0,00€

Maintenance

Ensure the proper functioning of your HEAD PRESSURIZERS products with these simple cleaning and maintenance guidelines
Dust or sand particles present on tennis and padel courts, as well as the hairs of the balls, can adhere to the seal or the O-ring of the pressurizers and make it difficult for the air to seal inside. For this reason, it is vital to regularly clean and lubricate the products.
To lubricate HEAD PRESSURIZERS products, whatever the model, the O-ring must be disassembled with the help of a non-sharp tool and cleaned with a paper tissue. The cavity where the O-ring is placed must also be cleaned, as well as the spiral of the closure and the inside of the lid.
Afterwards, it is necessary to lubricate not excessively the closing spiral and the O-ring with silicone grease. If silicone grease is not available, water-based petroleum jelly or liquid glycerin can also be used. It is recommended to perform this process two or three times a year, depending on the use made of the HEAD PRESSURIZERS.

VIDEOS

HEAD X3 BLACK

Maintenance

HEAD X3 / X4 PUMP

Maintenance

Disassemble howitzer

HEAD X100 BASKET

Maintenance

AIR PUMP

Interchangable nozzle

 

HEAD X3 AND HEAD X4 PUMP CLEANING

 

CLEAN THE PRESSURIZER EVERY SOME TIME AND LUBRICATE IT:

  1. Disassemble the O-ring with something that is not sharp so as not to damage it, and clean it with a piece of paper.
  2. Clean the cavity or hole where the O-Ring and the spiral are placed with a piece of paper.
  3. Clean the inside of the Lid with a piece of paper.
  4. Lubricate NOT IN EXCESS with Silicone Grease. We recommend the WEICON brand.

HEAD X100 BASKETBALL CLEANING

 

CLEAN THE PRESSURIZER BUCKET EVERY SOME TIME AND LUBRICATE IT:

  1. Disassemble the Lid and the O-Ring with something that is not sharp so as not to damage it, and clean it with a piece of paper.
  2. Clean the cavity or hole in the Lid where the O-Ring is placed with a piece of paper.
  3. Clean the outline of the Base where the O-Ring rests with a piece of paper.
  4. Lubricate the O-Ring NOT IN EXCESS with Silicone Grease or neutral Vaseline. We recommend the WEICON brand.