fbpx

COMMENT ÇA MARCHE

Avez-vous des questions sur le fonctionnement des HEAD PRESSURISEURS DE TÊTE ? Find out here how pressurisers work to increase the lifespan of your tennis and padel balls.

EXPLICATION SUR LE PROCESSUS DE DIFFUSION

VIDEOS

HEAD X3 BLACK

How does it work?

HEAD X100 BASKET

How does it work?

Overture

Fermeture

HEAD X3 / X4 PUMP

How does it work?

POMPE À AIR

How does it work?

It is important to know that the quality of tennis and padel balls influences your condition and your recovery. Can the old balls be recovered? Yes, but this is a slow and tiresome process. We recommend you to start using our products with new balls. Ainsi, elles resteront toujours en parfait état.

We also recommend that you pressurise the balls just after every match or training session. Inactivity and cold are the main causes of loss of pressure in the balls. How many hours do you have to put the balls under pressure? There is no fixed time. Il suffira que vous laissiez les laissiez faire pression entre les matchs.

Combien de temps dureront les balles avec les PRESSURISEURS DE TÊTE ? This depends on the quality of the springs and the use to which they are put. Il faut tenir compte du fait que le caoutchouc agit comme un ressort et s'affaiblit sous l'effet des chocs. De plus, les boules perdent leurs poils avec le temps. For this reason, even if the pressure remains intact, there will come a time when it will be necessary to change the tires again. Néanmoins, nous pouvons vous assurer que Your balls will last up to four times longer!

HEAD X3 PUMP / HEAD X4 PUMP

Recommandation initiale : If you wish to fully fill a new ball with air without having used it beforehand, open the ball reservoir 48 hours before playing and pressurise the balls to 29 PSI. Being brand new, they can withstand higher pressures without deforming.

What pressure to apply ? : Our recommendation is to apply a pressure of 29 PSI. on your balls after each use to obtain maximum pressure.

Combien de temps mettre sous pression ? : Do not worry about the time that elapses between each pressurisation. The important thing is that from the end of the game until the next use, no matter how long it takes, the balls must be under pressure.

À garder à l'esprit : Inactivity and cold are the main causes of air loss (pressure) in the balls.

FICHE TECHNIQUE DE LA POMPE HEAD X3 // FICHE TECHNIQUE DE LA POMPE HEAD X4

HEAD X100 BASKET

Première recommandation : To find the ideal pressure for your HEAD X100 BASKET, introduce air with a pump or compressor until the safety pressure drops to between 21 and 27 PSI. Measure the number of PSI reached in order to know what pressure to apply during future use of the product.

Don't forget that when the safety hood closes, the air will be eliminated, thus reducing the pressure to 13 PSI. For this reason, you must reintroduce the air up to the limit set by the safety hood.

What pressure to apply ? : Our recommendation is to apply a pressure of 21 PSI. on your balls after each use to obtain maximum pressure and to prevent the rubber from squeezing. Ainsi, il offrira un meilleur rebond beaucoup plus longtemps.

Combien de temps mettre sous pression ? : Do not worry about the time that elapses between each pressurisation. The important thing is that from the end of the game until the next use, no matter how long it takes, the balls must be under pressure.

À garder à l'esprit : Inactivity and cold are the main causes of air loss (pressure) in the balls.

Le meilleur du HEAD X100 BASKET : HEAD X100 BASKET does not allow a higher pressure than the one indicated by the safety pad, so that the rubber will maintain a tighter and more homogeneous bounce for much longer.

FICHE TECHNIQUE DU PANIER HEAD X100

Funcionamiento HEAD PRESSURIZERS

RECOMMENDED PRESSURES :

  • LENT BALLE -> 11 PSI.
  • MOYEN  BALLE -> 15PSI.
  • MOYEN-RAPIDE BALLE -> 24 PSI 
  • RAPIDE BALLE -> 29 PSI 

Recommandations pour les POMPE HEAD X3 et HEAD X4 :

    • We recommend you to pressurise the springs to 29 PSI.
    • All the new springs have a pressure range between 11.5 and 13.5 PSI.
    • Any pressure above 14 PSI allows the springs to recover pressure.
    • The billiards slowly regain their pressure through the pores of the rubber, just as this occurs with the loss of pressure. Plus ils ont besoin d'air, plus il leur faudra de temps pour récupérer.
    • Soyez prudent ! If you apply too much pressure, it is possible that the ball will flap and flare up.
    • The new balls are sold with different pressures inside the tubes. HEAD PRESSURISEURS DE TÊTE égaliser la pression de toutes les balles.
    • Les balles qui retrouvent leur pression peuvent grossir.
    • The ball bounce is made thanks to the rubber, which has a spring effect. Little by little this material becomes brittle and loses quality, so over time the pressure will remain but the bounce will increase.

    Recommandations HEAD X100 BASKET :

    HEAD X100 BASKETBALL is recommended for tennis and padel professionals, such as schools, clubs and instructors. It is a high capacity pressuriser that allows you to recover the pressure of 103 balls at a time, and allows you to finish the course with only two bags of balls.

    The strong point of the HEAD X100 BASKET is that it can't be given a higher pressure than the one regulated by the safety pressure, between 21 and 27 PSI, the rubber remains in better condition for a longer timeThis provides a cleaner clean and a more homogeneous finish after a few months. Do training balls lose the same pressure as match balls? No. Tout d'abord, parce qu'ils répartissent les impacts sur plusieurs ballons. Et deuxièmement, parce que les ballons d'entraînement sont en mouvement du lundi au vendredi au vendredi ou le week-end.

    The air molecules are active when they are in motion for more hours, so that the air remains inside the ball for a longer period of time. Il faut se rappeler que inactivity is the main cause of air elimination from the ball. It is very important that they regain their pressure, but that it does not deteriorate and that the rubber is not blown away.

    Several studies show thatthe quality of the ball's pressure ball's bounce and compression is exponentially improved. par rapport à celles qui ne le sont pas.

    mejora pelotas tenis padel con presurizador
    mejora pelotas tenis padel con presurizador

    VOULEZ-VOUS PLUS D'INFORMATIONS?

    • Cold or heat, altitude, level of play, the sport played (tennis or paddle), assiduity, level of play, number of impacts, the quality of the rubber or surface on which the sport is played may vary pressures besoins qui doivent être donnés aux pressuriseurs.
    • Attention ! Pressurisers that have a pressure injection system by means of a pump may receive much more pressure than recommended, but this will damage the tanks.
    • Le problème with the pressure of the balls at high levels is that they can take the shape of an oval and then have a bad bounce.