fbpx

Entretien

Assure the proper functioning of your products HEAD PRESSURISEURS DE TÊTE with these simple cleaning and maintenance guidelines.

The particles of sand or sand on tennis and padel courts, as well as the balls' balls, may adhere to the joint or toric joint of the pressurisers and make it difficult to seal the air inside. For this reason, it is essential to clean and lubricate regularly. the products.

To lubricate the products HEAD PRESSURISEURS DE TÊTEWhatever the model, the torque joint must be disassembled with the aid of a non-crushing tool and cleaned with a paper towel. The cavity in which the torque joint is placed must also be cleaned, as well as the spiral of the lock and the inside of the cover.
Ensuite, il faut lubrifier pas trop the locking spiral and the torque joint with the silicone rubber. If silicone rubber is not available, water-based vaseline or liquid glycerine may also be used. It is recommended to carry out this procedure two or three times a year, depending on the use made of the HEAD PRESSURISEURS DE TÊTE.

HEAD X3 BLACK

Maintenance

HEAD X100 BASKET

Maintenance

HEAD X3 / X4 PUMP

Maintenance

Assembling and disassembling the obusier:

NETTOYAGE POMPE HEAD X3 ET TÊTE X4

 

CLEAN THE PRESSURIZER EVERY SOME TIME AND LUBRICATE IT:

  1. Disassemble the O-ring with something that is not sharp so as not to damage it, and clean it with a piece of paper.
  2. Clean the cavity or hole where the O-Ring and the spiral are placed with a piece of paper.
  3. Clean the inside of the Lid with a piece of paper.
  4. Lubricate NOT IN EXCESS with Silicone Grease. We recommend the WEICON brand.

NETTOYAGE DE BASKET-BALL HEAD X100

 

CLEAN THE PRESSURIZER BUCKET EVERY SOME TIME AND LUBRICATE IT:

  1. Disassemble the Lid and the O-Ring with something that is not sharp so as not to damage it, and clean it with a piece of paper.
  2. Clean the cavity or hole in the Lid where the O-Ring is placed with a piece of paper.
  3. Clean the outline of the Base where the O-Ring rests with a piece of paper.
  4. Lubricate the O-Ring NOT IN EXCESS with Silicone Grease or neutral Vaseline. We recommend the WEICON brand.