HOME > HEAD X3 PUMP
Ball Pressuriser Head X3 Pump
45,00€
DESCRIPTION
Restore pressure to your tennis and padel balls thanks to the new HEAD X3 PUMP pressuriser with air pump. It is easy to use, economical and durable. It can hold up to three balls.
Out of stock
INSTALLATION
MAINTENANCE
VALVE REPLACEMENT
OBUS ASSEMBLY
Product information
HEAD X3 is easy to use, quick and lightweight. To use it, insert up to three tennis or padel balls inside the cylinder and screw the cover on up to the arrow-shaped marking on the base piece as an indication. Don't forget to fit the O-ring to insulate the air inside the product.
Insert the nozzle of the air pump into the HEAD X3 valve and press the pressure gauge with the flap raised until a pressure of up to 29 PSI is reached. Then close the flap of the pump and remove the nozzle. That's it, your balls are recovering like new.
By having the free space filled with compressed air we increase the internal pressure of the HEAD X3 and so the balls cannot eliminate their internal air, maintaining and regaining the original pressure until the next time they are used.
Attention! Don't forget to drain the air out of the valve with the help of the plug before opening the lid. HEAD X3.
The new HEAD X3 has been designed to restore the original pressure of tennis and padel balls and keep them in perfect condition between matches. Thanks to its high-end valve it is possible to inject air inside the cylinder and increase the pressure, allowing the balls to be fully recovered. It is the most complete and advanced product on the market. Easy to use and resistant.
Its strengths are:
- Recover tennis and paddle balls
- Reduced size
- Lightweight
- Easy to use with air pump
- New improved design
- Transparent for checking the condition of the balls
- Including O-ring and plug to protect the valve
- WEIGHT: 361 g / 12.73 oz
- WEIGHT WITH AIR PUMP: 529 g / 18.65 oz
- LENGTH: 230 mm / 9.05 in
- COVERED WIDTH: 85 mm / 3.34 in
- CYLINDER WIDTH: 70 mm / 2.75 in
CLEAN THE PRESSURISER FROM TIME TO TIME AND LUBRICATE IT:
- Disassemble the O-ring with something non-sharp to avoid damaging it, and clean it with a piece of paper.
- Clean the cavity or recess where the O-ring and the spiral are placed with a piece of paper.
- Clean the inside of the lid with a piece of paper.
- Lubricate NOT IN EXCESS with Silicon Grease. We recommend WEICON brand.
DOWNLOAD PRODUCT SHEET
Reviews